Silicone Hose, 3/4" x 5/8" 45 deg. Reducing Elbow 11012 The 4-ply reinforcement results in

The 4-ply reinforcement results in a 5mm wall thickness (80mm / 3 3/16" and 61mm / 2 3/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

The 4-ply reinforcement results in a working pressure rating in excess of 30 psi and a 5mm wall thickness (70mm / 2 3/4" OD)

These 90 degree reducer elbow hoses have a 57mm ID at one end and a 51mm ID at the other end to connect a 2 1/4" OD tube to a 2" OD tube

These anodized aluminum joiner nipples are designed for splicing together our 38mm (1 1/2") ID silicone coolant or turbo intake hose

This is critical to prevent the hose from coming off under pressure

Silicone Hose, 3/4" x 5/8" 45 deg. Reducing Elbow 11012 The 4-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These 45 degree reducer elbow hoses have a 19mm ID at one end